PS5 Analog Stick Replacement for Sony Playstation 5 PS5 Joysticks Replacement 3D PS5 Controller Joystick Replacement Sensor Module for PS5 Joystick Thumbstick Controller Accessory Part with Kit(2Pack)

EL7 FU 2.3K for PS5 controller
2x substitute analog joystick work with PlayStation 5 DualSense wi-fi controller. The thumbstick module was made by Favor Union (FU). The stick controller comes with 2.3KΩ trimmer potentiometers in orange coloration. PS5 controllers use two sorts of joysticks from two totally different producers. EL7 was made by Favor Union (FU), whereas EL6 was from ALPS. EL7 and EL6 are interchangeable with one another

✔ Substitute the wiper alone even with out soldering
In some instances, you may simply change the wheel within the potentiometer to unravel particular issues like: Stuttering, useless zone, creeping, or not as responsive appropriately
✔ Substitute the potentiometer alone with an iron
80% probabilities of joystick downside are brought on by the sensor. In one other phrases, the rotary mechanism and the tactile switches usually are not the issue. De-soldering the unit with solely 3Pin could be simpler than changing the whole module with as many as 14 prongs
✔ A warmth gun to switch the entire module
That is probably the most steered for an skilled soldering skilled
✔ Specialists with a standard iron to switch the entire unit
For a soldering skilled with no skilled de-soldering wick braid, solder sucker pump or sizzling air rework station at hand. To make it simple, we advise crushing the issue joystick into sufficiently small items with a pair of pliers
✔ By skilled technicians in a cellphone restore store
Instructed for somebody with no helpful instruments

[EL7 FU 2.3K for PS5 Controller] – 2x substitute analog joystick work with PlayStation 5 DualSense wi-fi controller. The thumbstick module was made by Favor Union (FU). The stick controller comes with 2.3KΩ trimmer potentiometers in orange coloration
[Compatibility] – PS5 controllers use two sorts of joysticks from two totally different producers. EL7 was made by Favor Union (FU), whereas EL6 was from ALPS. The 14 prongs had been positioned as the identical. EL7 and EL6 are interchangeable with one another
[Additional Resistor] – Difficult transferring mechanism and each day put on and tear lastly triggered drifting. Even new sensors can’t be 100% balanced. Calibrating in controller settings may not work. We packed 10x correction resistors to unravel the potential downside in {hardware} stage. Solder one or two paralleled tiny resistors onto the potentiometer at the wrong way in opposition to drifting. It is going to assist appropriate 3 to five levels drifting
[When to replace] – The analog joystick must be changed when your controller has the issue of drifting, creeping, stuttering, a blind spot, a useless spot, a useless zone, no response when clicking, or it would not middle after years of damage and tear. The OEM real restore components guarantee accuracy and lengthen lifespan
[Reminder of DIY] – With as many as 14 prongs, de-soldering and soldering the entire module takes severe abilities. We advise changing the potentiometers first to unravel a lot of the joystick issues. To desolder the whole joystick module off PCB by a standard soldering iron, please check out the desoldering equipment