ElecGear 8X Joystick Drift Fix Repair Kit for Controller, Solve Thumbsticks Drifting Issue with Correction Variable Resistor for PS5, PS4, Steam Deck, Xbox, Switch Pro, Drone and VR Analog Sticks

8PCs of add-on flex circuit boards are for fixing the constant drifting concern of your controllers. Solder it onto the again of downside joystick, alter the tiny variable resistor in opposition to the drifting course. It calibrates your analog sticks in {hardware} stage. 10K and 2K ohm variations included. Works with the sticks made by ALPS, FU and different third events

Earlier than Shopping for:
1. Consider for those who’re helpful with fundamental soldering expertise and DIY gear
2. Confer with the appropriate listing or Be certain that the sensor is 3Pin 2KΩ or 10KΩ
3. Be certain that the thumbstick drifts in a single mounted course
4. Please go to ElecGear substitute joysticks or potentiometers as an alternative for issues beneath:
(Random drifting, Caught motion, Stuttering, Blind spot, Lifeless zone or No response when clicking)

✅Recognized 2KΩ Suitable Controllers:
PS5 DualSense, some newest PS4 Professional controller

✅Recognized 10KΩ Suitable Controllers:
PS4, PS4 Slim and PS4 Professional, PS3 (3Pin Model), PS2
Xbox Collection S|X, Xbox One S|X, Xbox Elite 1/2, Xbox 360
Steam Deck
Swap Professional
8Bitdo SNES, Nvidia Protect, Scuf Impression, GameCube, Wii U, PDP
Some Drone and VR Headset distant controller, like DJI

❌Recognized Incompatible Controller:
Swap Lite, Swap Joycon, N64, 2DS, 3DS
Oculus Quest
Sony PS Vita, PSP
Most Arcade, Flight or Fighter Stick

The best way to DIY?
1. Measure the resistance of the potentiometer: 10K or 2K
2. Resolve if the PCB must be reduce into two elements
3. Teardown your controller
4. Solder the PCB onto the again of joystick
5. Alter the trimmer pot to eradicate the drifting

Packaging:
4x Drift Repair PCB Rev.2K
4x Drift Repair PCB Rev.10K
1x Slotted Adjusting Instrument
1x PH000 Screwdriver
1x Pry Opening Instrument
(🔺Soldering instruments are Not included! And Not all teardown instruments included!)
[Fix Joystick Drift Issue] – If the thumbstick consistently drifts in a single course, you want this add-on flex circuit board for gaming, VR and drone distant controller. The tiny PCB solves the drift in {hardware} stage, merely alter the variable resistor to eradicate the drifting. (🔺Not for downside of random drifting, caught motion, stuttering, blind spot, useless zone or no response when clicking. Please flip to ElecGear substitute joysticks or potentiometers as an alternative.)
[4 pack of 2K Version] – Works with analog sticks with 2.1 or 2.3 KΩ potentiometers made by ALPS, FU and different third social gathering. Match PS5 DualSense controllers (BDM-010, BDM-020 & BDM-030), and a few newest PlayStation 4 Professional DualShock. Be certain that the issue joystick got here with 3Pin sensor and is round 2K ohm. The left and proper flex circuit board could be reduce into 2 elements to keep away from the interference in case there’re digital elements in the best way
[4 pack of 10K Version] – Works with analog sticks with 10KΩ potentiometers made by ALPS, FU and different third social gathering. Match PS4, PS4 Slim and Professional, Xbox Collection S|X, Xbox One S|X, Xbox Elite, Steam Deck, Nintendo Swap Professional and different controllers: 8Bitdo, Scuf, PDP and extra. Works with some older controllers: GameCube, Wii U, Xbox 360 and PS3 (3pin). Additionally work with DJI and different drone distant controllers. Be certain that the issue joystick got here with 3Pin sensor and is round 10K ohm
[Why Stick Drifts?] – A number of elements trigger joystick drifting a standard concern. Even new joysticks can drift for the reason that famend makers designed it this manner. 1. The tiny mechanical construction was born with out precision. ALPS reported tolerance of 20% on their RKJXV collection. 2. Put on to the wiper and trimmer pot shortens the given lifespan 2M cycles. 3. Spring fatigue and materials stretching made it not centered. 4. Not aligned soldering atop PCB. 5. Mud, moisture and drop make it worse
[Kindly Reminder] – 1. Not all joysticks are appropriate with, examine the compatibility listing earlier than shopping for. 2. You need to teardown the controller and fundamental soldering expertise and instruments wanted. 3. The particular slotted screwdriver is for adjusting the resistance. 4. Plastic pry device and cross-headed screwdriver are for many controllers, whereas particular instruments possibly wanted in your particular controller (Not included!). 5. Included 4PCs of 10KΩ and 4PCs of 2KΩ within the field