ElecGear 4X Replacement Joystick (EL2 FU 10K) + 4X Drift Fix PCB for PS4 / PS3 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module for Playstation
$13.92 $15.00
Please check out product ID: B0BK7169M8 for the desoldering package, and B0BGPCCYH8 for fixing drifting drawback
EL2 FU 10K for PS4 and PS3 controllers
4x alternative analog joystick was present in some PS4 DualShock 4 got here with PlayStation 4 Professional, and a few PS3 controllers additionally use this model. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10KΩ trimmer potentiometers in orange. The 14 prongs had been positioned as the identical as ALPS version. Technically, the entire unit is interchangeable with EL1 ALPS 10K utilized in PS4 controllers, and different manufacturers like ‘Scuf’ and ‘Razer Raiju Final’ with ALPS joysticks inside. Nevertheless, the trim pot resistor alone isn’t interchangeable with ALPS version
✔ Change the wiper alone even with out soldering
In some circumstances, you may simply substitute the wheel within the potentiometer to resolve particular issues like: Stuttering, lifeless zone, creeping, or not as responsive correctly
✔ Change the potentiometer alone with an iron
80% possibilities of joystick drawback are brought on by the sensor. In one other phrases, the rotary mechanism and the tactile switches usually are not the issue. De-soldering the unit with solely 3Pin could be simpler than changing the whole module with as many as 14 prongs
✔ A warmth gun to interchange the entire module
That is essentially the most instructed for an skilled soldering professional
✔ Specialists with a standard iron to interchange the entire unit
For a soldering professional with no skilled de-soldering wick braid, solder sucker pump or scorching air rework station at hand. To make it straightforward, we advise crushing the issue joystick into sufficiently small items with a pair of pliers
✔ By skilled technicians in a cellphone restore store
Instructed for somebody with no useful instruments
[EL2 FU 10K for PS4/PS3 Controller] – 4x alternative analog joystick was present in some PS4 DualShock 4 got here with PlayStation 4 Professional, and a few PS3 controllers additionally use this model. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10KΩ trimmer potentiometers in orange
[Compatibility] – The 14 prongs had been positioned as the identical as ALPS version. Technically, the entire unit is interchangeable with EL1 ALPS 10K utilized in PS4 controllers, and different manufacturers like ‘Scuf’ and ‘Razer Raiju Final’ with ALPS joysticks inside. Nevertheless, the trim pot resistor alone isn’t interchangeable with ALPS version
[Additional Resistor] – Difficult shifting mechanism and day by day put on and tear lastly prompted drifting. Even new sensors can’t be 100% balanced. Calibrating in controller settings may not work. We packed 10x correction resistors to resolve the potential drawback in {hardware} stage. Solder one or two paralleled tiny resistors onto the potentiometer at the wrong way towards drifting. It is going to assist appropriate 3 to five levels drifting
[When to replace] – The analog joystick must be changed when your controller has the issue of drifting, creeping, stuttering, a blind spot, a lifeless spot, a lifeless zone, no response when clicking, or it would not heart after years of wear and tear and tear. The OEM real restore elements guarantee accuracy and extend lifespan
[Reminder of DIY] – With as many as 14 prongs, de-soldering and soldering the entire module takes critical expertise. We recommend changing the potentiometers first to resolve many of the joystick issues. To desolder the whole joystick module off PCB by a standard soldering iron, please check out the desoldering package at product ID: B0BK7169M8
There are no reviews yet.