ElecGear 4X Replacement Joystick (EL1 ALPS 10K) + 4X Drift Fix PCB for PS4 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module for Playstation 4, Slim and Pro

Please check out product ID: B0BK7169M8 for the desoldering package, and B0BGPCCYH8 for fixing drifting downside

EL1 ALPS 10K for PS4 controllers
4x alternative analog joystick work with PS4 DualShock 4 wi-fi controllers got here with PS4, Slim or Professional. The thumbstick module was made by ALPS. It belongs to RKJXV stick controller collection. It comes with 10KΩ potentiometers. We provide two ALPS fashions for PS4 and PS5. The distinction is the resistance worth of the potentiometer. Usually, you may distinguish them from the colour of the aspect plastic. EL1 is 10K ohm in grey, whereas EL6 is 2.1K in black. We strongly recommend measuring the resistance worth earlier than ordering. Some PS5 controllers include inexperienced aspect plastic which can also be EL6 2.1K

✔ Change the wiper alone even with out soldering
In some instances, you may simply change the wheel within the potentiometer to unravel particular issues like: Stuttering, lifeless zone, creeping, or not as responsive appropriately
✔ Change the potentiometer alone with an iron
80% possibilities of joystick downside are brought on by the sensor. In one other phrases, the rotary mechanism and the tactile switches are usually not the issue. De-soldering the unit with solely 3Pin will be simpler than changing the whole module with as many as 14 prongs
✔ A warmth gun to exchange the entire module
That is probably the most urged for an skilled soldering knowledgeable
✔ Specialists with a traditional iron to exchange the entire unit
For a soldering knowledgeable with no skilled de-soldering wick braid, solder sucker pump or sizzling air rework station at hand. To make it straightforward, we recommend crushing the issue joystick into sufficiently small items with a pair of pliers
✔ By skilled technicians in a cellphone restore store
Instructed for somebody with no useful instruments

[EL1 ALPS 10K for PS4 Controller] – 4x alternative analog joystick work with PlayStation DualShock 4 controllers. The thumbstick module was made by ALPS. This RKJXV stick controller collection comes with 10KΩ trimmer potentiometers. EL1 is broadly utilized in PS4, Slim and Professional controllers and different manufacturers like ‘Scuf’ and ‘Raiju Final’
[Compatibility] – We provide two ALPS fashions for PS4 and PS5. The distinction is the resistance worth of the potentiometer. Usually, you may distinguish them from the colour of the aspect plastic. EL1 is 10K ohm in grey, whereas EL6 is 2.1K in black or Inexperienced. We strongly recommend measuring the resistance worth earlier than ordering
[Additional Resistor] – Difficult transferring mechanism and every day put on and tear lastly triggered drifting. Even new sensors can’t be 100% balanced. Calibrating in controller settings won’t work. We packed 10x correction resistors to unravel the potential downside in {hardware} degree. Solder one or two paralleled tiny resistors onto the potentiometer at the wrong way in opposition to drifting. It should assist appropriate 3 to five levels drifting
[When to replace] – The analog joystick must be changed when your controller has the issue of drifting, creeping, stuttering, a blind spot, a lifeless spot, a lifeless zone, no response when clicking, or it would not heart after years of damage and tear. The OEM real restore elements guarantee accuracy and extend lifespan
[Reminder of DIY] – With as many as 14 prongs, de-soldering and soldering the entire module takes critical expertise. We advise changing the potentiometers first to unravel a lot of the joystick issues. To desolder the whole joystick module off PCB by a traditional soldering iron, please check out the desoldering package at product ID: B0BK7169M8