Product Description
2022 UPGRADED 2 IN 1 WIRELESS MICROPHONE HEADSET
✔Cardioid Microphone to Clear voice.
✔Plug and play.No want pair.
✔165 ft(50 meter) sign receiving efficient distance.
✔ UHF Wi-fi Tech: FCC licensed unbiased high-frequency band, no cross-frequency interference when a number of items are used collectively.
✔Upgraded from 300 to 450 mAh, work 6-7 hours.
✔3 pink indicators symbolize 100% left battery, 2 for 66% left, 1 for 33% left.
✔15 Units Working Concurrently: Help 15 units of microphones working concurrently in numerous frequency bands with out interfering with one another.
✔ Use Straight: Voice amplifier, Energy amplifier, Stage Speaker, Mixer.
✔ Help Jack: 6.35 mm MIC jack.
Please notice:
✘ NOT Help Jack: AUX/Line in jack.
✘ NOT Help Units: Bluetooth speaker, iMac, MacBook.
✘ NOT Included: Product NO speaker, NO amplifier, NO auditory operate.
165 Toes Receiving Vary
UHF Anti-interference.Plug and play.No want pair.165 ft(50 meter) sign receiving efficient distance.
Cardioid Microphone to Clear voice
Microphone has probably the most sensitivity on the entrance and is least delicate on the again. This isolates it from undesirable ambient sound and provides far more resistance to suggestions than omnidirectional microphones.
400 mAh Battery Capability
6 hours working time. Absolutely charging time solely takes 2.5 hours, USB twine has two cost port which can be utilized for charging the transmitter and receiver on the identical time
2 in 1 Design
Select the headset mode or handheld mode based on your wants
Packing Checklist:
Transmitter *1Receiver *1Headband *12 in 1 USB charging cable *1User handbook *1
What if it would not work or has NO Sound?
1. Firstly activate the ability and observe the battery indicators to substantiate whether or not they have electrical energy, cost them if low battery.
2. Then test in case your system is throughout the vary of units supported by the microphone: AUX/Line in jack, Bluetooth speaker, Laptop computer laptop and MacBook should not supported.
3. Freely contact if any questions!
What if it may well’t Pair?
If the blue lights proceed flashing, signifies that the pairing was not profitable, please re-pair them with following steps:
1. Flip off the transmitter and receiver;
2. Activate the transmitter and lengthy press key “quantity+” “volume-“on the identical time for five seconds, the indicator gentle begins flashing blue, ready for pairing;
3. Activate the receiver, anticipate auto pairing about 5 seconds;
4. Indicator gentle of the transmitter and receiver cease flashing after a profitable pairing.
How you can use a number of wi-fi microphone headsets on the identical time?
When a number of units of WXM05 are utilized in the identical place on the identical time, the frequency level must be minimize: Press and maintain quantity “-” button for five seconds to modify the frequency randomly. It helps as much as 15 units of WXM05.
【Heat Suggestions】This wi-fi microphone headset just for Mic Jack, not help for Aux/Line in Jack. It is a microphone system for voice enter, no auditory operate, no speaker. Not Suitable with Bluetooth Audio system/Macbook.
【Skilled Wi-fi Microphone Headset】Upgraded Bietrun wi-fi microphone is FCC licensed, which may work with Mixer, Pa system speaker and amplifier and many others directly or radiation. UHF unbiased frequency bands can resist jamming and howling ,clearer the sound high quality.
【How you can Use】Activate the transmitter and receiver, the blue gentle will flash for about 2s. Indicator gentle stops flashing after a profitable match, then you need to use it, no additional operation. Lengthy press quantity “-” button of the transmitter till the blue gentle flash 3 occasions to vary channels, which may keep away from interference.
【6 Hours Working Time】Inbuilt latest upgraded 450 mah rechargeable lithium-ion batteries, transmitter and receiver could be charged concurrently with the twin usb v2.0 cable. Absolutely cost is barely 2.5 hours, working time upgraded to six hours.
【What If No Sound】Activate transmitter and lengthy press “+” key and “-” concurrently till the indicator gentle begins flashing (blue). Then activate receiver, anticipate auto pairing about 5s. Indicator gentle stops flashing after a profitable pairing. Please be at liberty to contact us when you’ve got any questions.
There are no reviews yet.