4X Replacement Joystick (EL7 FU 2.3K) + 4X Drift Fix PCB for PS5 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module Compatible with DualSense Playstation 5

Please check out product ID: B0BK7169M8 for the desoldering package, and B0BGPCCYH8 for fixing drifting downside

EL7 FU 2.3K for PS5 controller
4x alternative analog joystick work with PlayStation 5 DualSense wi-fi controller. The thumbstick module was made by Favor Union (FU). The stick controller comes with 2.3KΩ trimmer potentiometers in orange shade. PS5 controllers use two sorts of joysticks from two completely different producers. EL7 was made by Favor Union (FU), whereas EL6 was from ALPS. EL7 and EL6 are interchangeable with one another

✔ Change the wiper alone even with out soldering
In some circumstances, you may simply change the wheel within the potentiometer to unravel particular issues like: Stuttering, lifeless zone, creeping, or not as responsive accurately
✔ Change the potentiometer alone with an iron
80% probabilities of joystick downside are brought on by the sensor. In one other phrases, the rotary mechanism and the tactile switches will not be the issue. De-soldering the unit with solely 3Pin might be simpler than changing your entire module with as many as 14 prongs
✔ A warmth gun to interchange the entire module
That is essentially the most instructed for an skilled soldering skilled
✔ Specialists with a traditional iron to interchange the entire unit
For a soldering skilled with no skilled de-soldering wick braid, solder sucker pump or scorching air rework station at hand. To make it simple, we recommend crushing the issue joystick into sufficiently small items with a pair of pliers
✔ By skilled technicians in a cellphone restore store
Prompt for somebody with no helpful instruments

[EL7 FU 2.3K for PS5 Controller] – 4x alternative analog joystick work with PlayStation 5 DualSense wi-fi controller. The thumbstick module was made by Favor Union (FU). The stick controller comes with 2.3KΩ trimmer potentiometers in orange shade
[Compatibility] – PS5 controllers use two sorts of joysticks from two completely different producers. EL7 was made by Favor Union (FU), whereas EL6 was from ALPS. The 14 prongs had been positioned as the identical. EL7 and EL6 are interchangeable with one another
[Additional Resistor] – Sophisticated transferring mechanism and every day put on and tear lastly triggered drifting. Even new sensors can’t be 100% balanced. Calibrating in controller settings may not work. We packed 10x correction resistors to unravel the potential downside in {hardware} degree. Solder one or two paralleled tiny resistors onto the potentiometer at the other way towards drifting. It can assist appropriate 3 to five levels drifting
[When to replace] – The analog joystick must be changed when your controller has the issue of drifting, creeping, stuttering, a blind spot, a lifeless spot, a lifeless zone, no response when clicking, or it would not middle after years of damage and tear. The OEM real restore elements guarantee accuracy and lengthen lifespan
[Reminder of DIY] – With as many as 14 prongs, de-soldering and soldering the entire module takes critical expertise. We recommend changing the potentiometers first to unravel a lot of the joystick issues. To desolder your entire joystick module off PCB by a traditional soldering iron, please check out the desoldering package at product ID: B0BK7169M8