1mm Stainless Steel Oversize Actuator for Sanwa JLF-TP-8YT Joystick JLF Series Joysticks Hori Hayabusa joystick OTTO DIY Update Kits (1mm 1pcs)

The oversize actuators are manufactured from arduous carrying Stainless Metal and is meant for use as substitute actuators on the Sanwa JLF collection of joysticks. As soon as fitted, you’ll profit from a shorter throw and sooner engagement of your joystick, which can end in improved gameplay. The oversize actuator is right for battle stick builders and people clients who like modding battle sticks for improved efficiency. The oversize actuator has been examined with sq. and octagonal restrictor plates and engages the inventory switches on the Sanwa JLF collection of joysticks constantly.
Set up:

1. Take your JLF collection joystick and utilizing a small flat head screwdriver, gently prise off the C Clip on the underside of the joystick.
2 Carry off the inventory actuator. Exchange this with the oversize actuator and gently push down.
3 Utilizing a small pair of pliers, gently grip the C Clip and with a mild squeeze, the C Clip will snap again into place.
IMPORTANT: Do not use the OTTO DIY actuators on optical levers.
Reduce the activation

One of the vital frequent mods is the change of the Sanwa Denshi and / or Hori Hayabusa actuators, customers search to reduce the activation distance between the mic and the actuator (this is called swing) this helps to have much less demanding markings . The primary industrial actuators within the mods flip had been the 1mm ones, OTTO DIY can current in some variations the 12mm sizes, which might be the 1mm one, it is because the unique actuator has a radius of 11mm and when including 1mm it might be 12mm, that’s the reason it’s referred to as 1mm or 12mm actuators. So on with the 12.5mm actuators that might be 1.5mm or 13mm that might be 2mm.
1mm 1.5mm 2mm Stainless Metal Oversize Actuator for Sanwa JLF-TP-8YT Joystick JLF Collection Joysticks Hori Hayabusa joystick OTTO DIY Replace Kits
Most essential we now have 3 form of Oversize Actuators you possibly can select. And likewise can use for the OTTO DIY Improve Equipment
1mm oversize actuatorr is used to activate every microswitch plunger, with the 1.5mm and 2mm oversize actuator designed to shorten the gap between the actuator and the plunger and pace up actuation.
Appropriate with all of the Sanwa JLF collection of joysticks and Hori Hayabusa joystick
This provides the Sanwa JLF Collection Joystick quite a few enhancements beforehand unavailable to it.